Marble Etch Removing Kit

ETCH REMOVING KIT FOR MARBLE

This kit contains products and supplies designed to eliminate small etch marks from most marble, limestone, travertine and other porous natural stones. Etch marks are chemical acid burns created by acids such as lemon, vinegar, citric juices, acid-based cleaners, etc. Etch marks can also be caused by alcohol and ammonia. An etch mark removes the shine from polished marble. The products in this kit can also remove water marks.

Stains, such as oil and grease stains will not be removed with the Etch Removing Kit.

To remove some older and deeper etch marks, the use of a professional stone restoration company may be needed.

Your kit includes:

1. Non-acid Etch Removing & Polishing Compound (3x200 cc containers)

2. 1 buffing pad holder

3. 2 hand buffing pads

4. Neutral stone cleaner, LAVENET ® (ready to use)

5. Step-by-step method of application

Methods of Application:

• Clean the stone surface with LAVENET ® stone cleaner and a damp sponge

• Rinse with a damp sponge and water

• Wet the etched area with water

• Add enough Etch Removing & Polishing powder to make a soft paste

• Rub the paste mixture on the etch mark with the pad holder and one buffing pad

• Buff the marks for 3 to 5 minutes

• Clean up the slurry with a damp sponge. Dry with a cotton cloth. Verify that the etch mark is gone, if not, repeat the process

• When the etch mark is gone, clean the area with a solution of LAVENET ® stone cleaner

• When dry, buff the stone with the second buffing pad (dry)

Caution: 

• Wear protective gloves

• Keep products away from children and pets

• Safety Data Sheets are available on all products upon request

Warning: Do not swallow. Keep out of children and pet’s reach. Avoid contact with eyes. The use of protective gloves is recommended

International Stoneworks, Inc., will not be liable for any damage ensuing to property or injury to operator or any other person due to misuse or misapplication of the Etch Removing Kit or any other chemicals sold by the company.