Tile Glow® #2 is a natural, non-wax compound for the polishing and restoration of most unglazed ceramic, porcelain and quarry tiles. gray 12 lbs.
17 inch 400 Grit. Regular foot traffic can wear stone floor. Dust and dirt particles dragged along underfoot are equivalent in roughness to nearly a 100 to 200 grit. Regular floor maintenance is critical in keeping the floor looking its best. When the floor starts to show signs of traffic, ISI Diamond Impregnated Pads can restore stone to a gloss finish....
A very light blend of natural and synthetic fibers for use with machine speeds of 175 RPM to 3000+ RPM. Pad can be reusable because of its durable fibers. Case includes 5 pads; Available in 10", 17", 19" and 20".
A lighter blend of natural and synthetic fiber than Gorilla® Pads and designed for more frequent use. It has highly responsive finishes. Used for multiple burnishing-medium finishes.
The White Buffing Pad is a very soft non-abrasive dry polishing floor pad for slow speed floor machines. Available in 17", 19" and 20"
The Scrub Grit II Brush is used for the medium to mildly aggressive cleaning of ceramic tile, marble, quarry tile, slate, terrazzo, as well as concrete, non-slip flooring, rubber, and VCT.
A non-wax acid compound for the polishing restoration of marble, travertine, limestone, terrazzo and agglomerates (cement or resin). Marbrofin® also enhances the color of marble and other calcium-based stones, removes etch marks, fine scratches, and grout haze. 6 lb. pail
A chemical action non-wax crystallizing polish for the maintenance of terrazzo, agglomerate tiles (cement and resin bonds). Marbrosol can also, in some cases, be used to polish marble surfaces. 1 pt.
The original blended natural fiber pad that gives a "wet-look" shine. Gorilla® is made with a blend of natural fiber and polyester. To clean it, just brush away dried wax with its die cut center. It will not glaze over. Used for minimal burnishing-hardener finishes.
The Scrub Grit II Brush is used for the medium to mildly aggressive cleaning of ceramic tile, marble, quarry tile, slate, terrazzo, as well as concrete, non-slip flooring, rubber, and VCT.
A water-based, user friendly, environmentally friendly impregnator sealer. 5 gal. pail
A natural non-wax, non-acid abrasive compound for the thorough honing and cleaning of older and/or worn marble, travertine, limestone and other stones. Ver Glow #1 will not remove lippage. It prepares the stone for polishing with Ver Glow #2. white 50 lb. pail
2020 International Stoneworks || theme by WaterThemes.com