International Stoneworks -- Lavenet

2523 Fairway Park Drive
Suite 510 ~ Houston, TX 77092
sales@intlstoneworks.com
(713) 956-8291 ~ 1-800-775-TILE
Fax (713) 956-8293

STRIP & GO™

STRIP & GO
DRY STRIPPING SYSTEM

For Marble, Travertine, Limestone, Granite, Slate, Flagstone and Terrazzo
Strip & Go saves time and money by reducing significantly the need to rinse and wait for the stone and grout to dry

Strip & Go

Strip & Go
Floor buffer (175 to 350 RPM)
Scrubbing pad (blue)
Pump sprayer.

Spray Strip & Go directly onto the stone surface and run the buffer with the scrubbing pad at the same time. Strip in 5'x5' sections.
When both sides of the pad are filled with wax, replace the pad and continue. Pads can be cleaned and re-used.

Strip & Go will it strip polyurethanes and other solvent sealers.
Do not use Strip & Go to strip floors with years of accumulated wax or sealer.
ALWAYS TEST STRIP & GO IN A SMALL, UNOBSTRUSIVE AREA.

Technical Specifications
Active Ingredients: Sodium metasilicate, 2-butoxyethanol, surfactant.
For further technical specifications see Material Data Sheet.

Usage: approximately 1,000 Sq. Ft. per gallon.
Notes:
Close the Strip & Go container tightly to prevent evaporation.

Keep from freezing - Do not let evaporate
PRECAUTION: The use of gloves and protective clothing is recommended when using Strip & Go
WARNING: Avoid contact with skin, eyes, clothes, in case of contact, flush thoroughly with water and call physician. Do not swallow. Keep out of children's reach.
International Stoneworks, Inc. will not be liable for any damage ensuing to property or injury to operator or any other person due to or misapplication of Strip & Go or any other chemicals sold by them.

Product Page

Download MSDS in .doc Format