KLEAN & GO
HEAVY DUTY ALKALINE CLEANER
Highly concentrated cleaner and degreaser for marble, limestone, travertine,
granite, slate, ceramic, quarry, porcelain tiles, and grout
- Fast acting
- Will not etch marble
- Deep cleaning action
- Non abrasive
- Does not remove the coloring
from most dyed grouting
Directions: Test first in an inconspicuous area to determine the effectiveness
and the desired results. Make sure all surfaces to be cleaned are swept
or vacuumed to remove loose debris. Dilute with warm water only. DO
NOT MIX WITH OTHER CHEMICALS.
| MIXING CHART |
| Use |
Klean & Go |
Warm Water |
| Heavy Duty Cleaner |
1/2 Gallon |
1 Gallon |
| Medium Duty Cleaner |
32 oz. |
1 Gallon |
| Light Duty Cleaner/Sprayer Refill |
16 oz/ |
1 Gallon |
- Apply mixed solution with
a clean mop, sponge or sprayer
- Agitate with a scrub brush
on (by hand or a floor machine)
- Rinse area well with clean
water & a sponge, wet/dry vacuum cleaner or damp mop Coverage: approx.
2,000 to 10,000 Sq. Ft. per gallon depending on the type of material,
texture, method of application & amount of soil.
Precautions: It is important to
always rinse Klean & Go thoroughly. When applying Klean & Go, the floor
will be slippery. Take necessary precautions to prevent accidents.
WARNING & PRECAUTIONS Do not swallow. Keep away from children and animals.
Wear rubber gloves, safety goggles and ventilate enclosed areas when handling
Klean & Go. If Klean & Go gets into eyes, rinse thoroughly with water. See
MSDS for more detailed safety information.
International Stoneworks, Inc. will not be liable for any damage ensuing
to property or injury to operator or any person due to the misuse or misapplication
of Klean & Go or any other chemical sold by the company.
Product
Page
View
MSDS in MS Word Format
|
