2523 Fairway Park Drive
Suite 510 ~ Houston, TX 77092
sales@intlstoneworks.com
(713) 956-8291 ~ 1-800-775-TILE
Fax (713) 956-8293

Does not yellow, and will not add or remove color or shine from stones. This sealer will not protect marble, limestone, flagstone, sandstone and travertine against acids, ammonia, alcohol and other inappropriate chemicals.

View MSDS

DIRECTIONS
Test in a small inconspicuous area with a 24-hour cure time to determine the ease of application. Allow new grout to cure a minimum of 48 hours prior to Seal & Go ® ”EPS” application. Make sure surface is clean and dry. Liberally apply a first coat with a brush, paint roller, or low pressure sprayer. Let penetrate for 10 to 15 minutes. DO NOT LET DRY. Wipe off any excess residue. A minimum of 2 hours later repeat procedure.

On very porous surfaces, the first coat will soak in considerably. The second coat will cover approximately double the first coat. Apply additional coats as needed. Do not walk on the surface for at least 1 hour. If after drying a light haze appears, lightly dampen a clean cloth with SEAL & GO ® “EPS” and wipe the surface. Full cure is achieved in 24 hours.

MAINTENANCE
Clean floor regularly with a solution of LAVENET.

COVERAGE
Estimated to be approximagely 200 to 1200 sq. ft. per gallon for first coat depending on the type of stone, porosity, texture of surface and method of application.

Content: 1 U.S. Gallon