2523 Fairway Park Drive
Suite 510 ~ Houston, TX 77092
sales@intlstoneworks.com
(713) 956-8291 ~ 1-800-775-TILE
Fax (713) 956-8293

BELLINZONI SUPERSEAL CE

Superseal CE is a penetrating solvent sealer that will slightly darken and add color to flamed, honed, and tumbled marble, granite and other natural stone. Superseal CE will add a light sheen to the stone surface.

Composition: Mixture of waxes and natural oils in trichloroethylene.

Coverage: 1 pint covers 100 to 300 square feet.

View Safety Data Sheet

Instructions For Use:

Test in a small inconspicuous area with a 24-hour cure time to determine the ease of application. Allow grout to cure a minimum of 48 hours prior to Superseal CE application. Check to make sure surface is clean and dry. Liberally apply a first coat with a brush, paint roller, or low pressure sprayer. Let penetrate for 10 to 15 minutes. DO NOT LET DRY. Wipe off any excess residue. A minimum of 2 hours later, repeat the procedure. Allow a minimum of 2 hours of drying time between coats.

On a very porous surface, the first coat will soak in considerably. The second coat will cover approximately double the first coat. Apply additional coats as needed. If after drying, a light haze appears, lightly dampen a clean cloth with Superseal CE and wipe surface.

Do not walk on surface for at least 2 hours. Full cure is achieved in 24 hours.

Technical Data

• Physical State: liquid
• Color: yellowish, transparent
• Odor: of trichloroethylene and lemon
• Specific Gravity (20°C): 1, 5±0, 02
• Idrosolubility: insoluble
• pH: n.a.

Disclaimer: the information presented above is provided by the Akemi Company. International Stoneworks Inc. declines any responsibility as to the veracity of this information.