CRYSTALLIZE YOUR MARBLE * SURFACES
WITHOUT STEEL WOOL
Finally a system to maintain polished marble and travertine surfaces without steel wool or stainless steel pads using your standard 175 RPM buffer Step 1
Sprinkle 3 oz. of Ver Glow No. 2 no-wax compound on a 5 Ft. x 5 Ft. marble section Step 2
Spray Buff & Go ® crystallizer directly on the Ver Glow No. 2 Step 3
Buff the slurry of Buff @ Go ® and Ver Glow No. 2 with a Touchstone
Marble pad ** until dry and polished Step 4
Repeat procedure on the adjacent 5 x 5 area Step 5 (if needed)
Spray again Buff & Go ® (this time without Ver Glow No. 2) and buff again with the Thouchstone marble pad until dry and polished * will not darken white marble or white grout
** pad is washable and re-usable | 
