|
|
|||||||
|
|
|
|
|
|
|
|
|
|
||||||||||
This is International Stoneworks' first "green" venture and we are so pleased to introduce products where their effectiveness is only matched by their eco-friendliness. It is International Stoneworks' firm belief that people should use only the best specialty products for their stone investments. We saw a demand, commercially and residentially, for efficient, safe, "green" products and we delivered. We want to promote environmental consciousness as well as make safe products not only for the public, but also for our employees. International Stoneworks is proud to give its clients the option to go green.
Lavenet Green Concentrate
Neutral cleaner for polished, tumbled, honed or flamed marble, limestone, travertine, granite, slate, flagstone & other natural stones.
Lavenet Green Ready-To-Use
Neutral cleaner for polished, tumbled, honed or flamed marble, limestone, travertine, granite, slate, flagstone & other natural stones.
Seal & Go® W
A water-based, user friendly, environmentally friendly impregnator sealer. It contains no solvents and is VOC compliant in all 50 states. Seal & Go® W is especially designed for interior stones and grout.
Ver Glow #1
A non-acid honing (sanding) compound used to remove fine scratches and give the stone an even, no-gloss patina (low shine).
Ver Glow #2
A non-acid high quality abrasive compound for marble polishing. It is used to remove fine scratches. Ver Glow # 2 is one of the most user friendly polishing compounds available. Ver Glow # 2 will not etch surrounding areas. This compound is especially effective on Thasos, Botticcino and other marbles where the use of acidic compounds is not recommended.
European Sparkle®
Extremely fine, non-wax, non-acid, polishing compound for marble. European
Sparkle® provides the highest possible shine at the end of the polishing cycle.
For better results, use our Natural Hair pad.
Emerald Sparkle®
Special polishing compound for Serpentine and green marble. For better results, use our Natural Hair pad.
Granite Glow®
A high quality non-acid honing and polishing compound for granite. Granite Glow®
is used in conjunction with Buff & Go® Plus to maintain new and
slightly worn granite floors. For better results, use our Natural Hair pads.
Strip & Go®
Concentrated environmentally friendly water-based, multi-purpose sealer & coating remover formulated to strip most topical sealers, urethane, coatings, acrylic finishes, wax coating, paints, adhesives and epoxy grout haze. It is safe to use on marble, travertine, limestone, sandstone, slate, granite, ceramic tile, grout and vinyl tile.
Tile Glow® #1 "Green"
Tile Glow® #1 "Green" is a natural, non-wax compound for the honing and deep cleaning of most unglazed ceramic, porcelain and quarry tiles.
Tile Glow ® #1 "Green" does not contain any hazardous acids or solvents. It contains citric acid, a "natural" acid used in food preparation and cosmetics, which gives it excellent cleaning power. Following the honing with Tile Glow ® #1 "Green", polish the tiles with Tile Glow ® # 2 "Green." Note: Tile Glow ® #1 is available in white, gray or black to suit grout colors.
Tile Glow® #2 "Green"
Tile Glow® #2 "Green" is a natural, non-wax compound for the polishing and restoration of most unglazed ceramic, porcelain and quarry tiles.
It does not contain any hazardous acids or solvents. It contains citric acid, a "natural" acid used in food preparation and cosmetics, which gives it excellent cleaning power.
Tile Glow® # 2 "Green" gives a long lasting shine, protects and provides a slip resistant finish to tiles. It does not yellow. The Tile Glow® Maintenance Program eliminates the need for constant waxing and stripping of these tiles. Note: Tile Glow® #2 "Green" is available in white, gray or black to suit grout colors.
Diamond Pad System
Marble and granite diamond pads to grind (lippage removal) and polish stone surfaces.
