|
Abrasives can
be ordered as wheels and mounted points for your Flexible Shaft
Unit. |
|
Wire Wheels are used for removing rust
and coatings:
- Flap Wheels
- Back-Up Pad
- Heman Grinding Wheel
- Resin Bonded Grinding Wheels
- Mounted Points
- Expanding Rubber Drums
Call International Stoneworks for ordering
details
|
 |
|
Buffs are made of pure unbleached muslin-types
and include:
- Tapered
- Goblet
- Hard Sewn
- Loose
All types use Tapered Adapter
|
| #1 - Cores - Cold wound
type made of special 375,000 PSI tensile strength high carbon
wire. These flexible Shaft cores can be cut cleanly at any point
without unraveling. Available in 1/8", 3/16", 1/4",
5/16", 7/16", 1/2", 9/16", 5/8", 3/4",
and 1" diameters. Specify right hand or left hand. |
 |
 |
#2 - Casings - Constructed
of special reinforced resilient rubber, strengthened by a wire
braiding. A flat inner spring serves the dual purposes of providing
additional strength while giving the core a bearing surface
to ride on. There is also an interlocked metal casing available.
This is grease-proof and features a galvanized finish to resist
corrosion. |
| #3 - Self-Contained Flexible
Shafts - Complete units ready to attache to your own motor,
drill press, lathe - any rotating spindle. Available for all
types of work, light deburring to heavy grinding. All feature
sealed double ballbearing construction on both the motorend
and handpiece to insure smooth and quiet operation and extend
service life. All shafts also feature strengthening springs
on the two outermost ends of the shaft for additional strength
and service. |
 |
 |
#4 - Rotary Files - Made
of pure tungsten carbide to far outlast standard steel cutters
and used in collet adapters. Excellent for fast stock removal
in any material inside or outside. Available in a variety of
shapes and sizes and custom ground for each specific application.
Call International Stoneworks for more detailed ordering information. |
|
Handpieces and Motorends
- #5 - Collet Handpiece
- #6 - Right Angle Handpiece
- #7 - #2 Handpiece
- #8 - #6 Handpiece
- #9 - #8 Handpiece
- #10 - Motorend
|
 |
 |
Adapters - Fit #6, #8, Collet, &
Right Angle Handpieces (Pictured Clockwise from Upper Left)
- #11 Adapters
- #12 Collet Adapter
- #13 Tapered Adapter
- #14 Grinding Wheel Adapter
- #15 Threaded Adapter
|
